AEV Bumper and License Plate

[Jeepster_27]

Any suggestions for those of us living in places requiring a front license plate? I haven't seen any AEV bumpers with plates. Some one must have run into this already? Where did you mount the plate?

[Mowabb]

This looks like a decent setup:

http://www.rocdogfab.com/index.php?option=com_content&task=view&id=7&Itemid=28

[JeepinJon]

for those not running a winch most people run the plate by mounting it to the same holes used to mount a fairlead.

[Tufjeep]

I use the EZ-Flip License Plate Bracket made by Tough Stuff Products, Inc. It mounts on your winch roller fairlead. It's worked great for several years, and when I need to use the winch, I just lift it up and start pulling rope!!

I got it from 4WD Hardware, part #000269.

It's much more secure than the Kilby roller fairlead bracket, which I did have, and I was always afraid someone was going to steal my custom license plate.

[Jeepster_27]

Thanks guys. The main reason for the AEV bumper (other than it's the best looking) is so I can mount a winch, so the EZ-Flip License Plate Bracket looks like a good choice.

[somewhereinla]

This looks like a decent setup:

http://www.rocdogfab.com/index.php?option=com_content&task=view&id=7&Itemid=28

Nice, very elegant design.

[markm]

This looks like a decent setup:

http://www.rocdogfab.com/index.php?option=com_content&task=view&id=7&Itemid=28


This is what I did .......http://i253.photobucket.com/albums/hh54/markmarriott/jeep/IMG_5441.jpg