PDA

View Full Version : IPF lights

buster04
08-19-2008, 07:02 PM
Does anyone have info on how I should install these? I have this long yellow wire with a red stripe- no clue and then another long one with a "C" tab on the end of it.. no clue?? help??
JeepinJon
08-19-2008, 07:30 PM
Does anyone have info on how I should install these? I have this long yellow wire with a red stripe- no clue and then another long one with a "C" tab on the end of it.. no clue?? help??

Which model do you have? Here (http://www.sidewinder.com.au/HARNESS-INSTRUCTION.jpg) is a link for the 900xs style light if that helps you out any.
buster04
08-19-2008, 07:55 PM
Which model do you have? Here (http://www.sidewinder.com.au/HARNESS-INSTRUCTION.jpg) is a link for the 900xs style light if that helps you out any.

I have the 900XS. IT seems like the Yellow with red is "H" and "C" is the other yellow one with the "c" tab.

SOund right?

Where else can I connect "H" to to get me switchable power??
JeepinJon
08-19-2008, 08:08 PM
I am thinking it is right, but just to make sure do you know which terminal of the relay they are attached to? If the solid yellow is on terminal 85 then that would be the ground, and if the yellow with red is coming from the switch and doesn't have the c clip (circular end) then that will get attached to the high beam trigger.
buster04
08-19-2008, 08:13 PM
I am thinking it is right, but just to make sure do you know which terminal of the relay they are attached to? If the solid yellow is on terminal 85 then that would be the ground, and if the yellow with red is coming from the switch and doesn't have the c clip (circular end) then that will get attached to the high beam trigger.

So If I go to the one with the high beam trigger then the lights will only come on iof the highs are engaged first, I don't want that I would like to flip them on independently of other lights, but never want them to go on while the jeep is off. So where should I go to with that wire?
JeepinJon
08-19-2008, 09:29 PM
So If I go to the one with the high beam trigger then the lights will only come on iof the highs are engaged first, I don't want that I would like to flip them on independently of other lights, but never want them to go on while the jeep is off. So where should I go to with that wire?

You are going to want to run that to a switched source of power (radio, lighter, etc...) with an inline fuse
kntr
08-21-2008, 07:52 AM
Let us know how they compare to the Lightforce lights.