View Full Version : Dana 60's Long Arm 37" Toyos Ferrari Yellow
MountZionOffroad
12-05-2007, 03:53 PM
THIS JEEP IS CURRENTLY FOR SALE! SEE PAGE TO AEV'S VEHICLES FOR SALE FORUM OR FOLLOW LINK BELOW
http://forum.aev-conversions.com/showthread.php?t=1474
This is our first Highline Kit, utilizing this kit with a variety of different products we are building a '02 TJ which will handle very extreme offroading, yet be easy and comfortable to drive. I will post pictures with continued progress.
Here is a brief build sheet:
'02 Jeep Wrangler, 4.0L, AT Transmission
Rubicon Express Tri Link Long Arm
Cage 4" Progressive Rate Coil Springs w/ Bilstein 5150 Shocks in the front
Fox 12" Coilover Shocks in the rear (Poly Performance) In Progress
Poison Spider Brawler Bumper w/ Warn 9.5ti Winch
Poison Spider Cage (Tig Welded & Powder Coated)
Poison Spider Rocker Knockers
Poison Spider Gas Tank Skid
Poison Spider Crusher Corners
Rock Hard Tire Carrier
Front Axle: HP Dana 60 King Pin w/ PSC Hydro Assist, 4.88, E-Locker, Forged Yoke, 35 Spline Axles EMS Offroad
Rear Axle: Full Float Dana 60 35 Spline, 4.88, E Locker, Forged Yoke
ORO Taillights
Rubicon Transfer Case
Skid Row Engine Transmission Skid
Rhino Lined Interior
MountZionOffroad
12-05-2007, 03:58 PM
Not too good at posting pics here is the link to our site for the build:
http://www.mountzionoffroad.com/Bills2002TJ.htm
MountZionOffroad
12-05-2007, 04:12 PM
http://www.mountzionoffroad.com/billstj
AEV Matt
12-05-2007, 06:49 PM
It took me a while to figure out the picture posting, basically you have the pic on your hard drive, go to the little paperclip thingy on the post window, find the pic on your hard drive and click upload. If its too big or doesn't work it won't pop up in the window, if it does pop up your good to go. Close the upload window and in your new post window, click on the paperclip thingy again, this time your pictures will be listed and you can insert it into your post.
Matt
PS Jeep looks great.
JeepinJon
12-05-2007, 08:09 PM
That is a nice looking Jeep build up. I really like the yellow.
Meeper
12-06-2007, 06:00 AM
MOUNTZION, i know you guys from PA Jeeps for the past two years, these guys build good quality jeeps...
MountZionOffroad
12-06-2007, 08:18 AM
Here are some pictures before and almost completed. We purchased the Jeep for our customer from a salvage auction, It has 30,000 Miles and was totaled after a roll over.
Laurie
12-06-2007, 12:53 PM
Looking fantastic...
I can't wait to get the Long-Arm / D60 / 37"+ thing going on under my fenders.
AEV Jordan
12-06-2007, 06:19 PM
Thats a great before and after. Good job.
Jdemonto
12-06-2007, 10:54 PM
Here you go! Nice work!
MountZionOffroad
01-06-2008, 06:01 PM
Here are some pictures of our last trip out, the Jeep did awesome!
MountZionOffroad
01-06-2008, 06:12 PM
Spent the day at Rausch Creek Offroad Park, was alot of fun, very cold, minimal carnage! Even started to snow towards the end of the day!
AEV Jordan
01-10-2008, 01:02 PM
Those look great.
Out of curiosity, Whats on the hood ?
MountZionOffroad
01-11-2008, 04:46 PM
I Believe it is a bit of roots/mud from earlier in the day.
Did you have to trim the rock sliders so they wouldn't interfere with the fender flares? Did you choose the ones with no step bar so they would fit better?
-DJ
MountZionOffroad
02-01-2008, 10:25 AM
Yes we chose the no bar Rocker Knockers, trimmed them, then added a slider bar & powdercoated everything again. None of the pics show the new bar. I will have to try and get something posted as soon as everything is reinstalled.
Mieser
02-08-2008, 09:32 AM
How wide are the axles? The width looks about perfect with the high backspacing H2 wheels....
Nice job.
offroader613
02-08-2008, 04:53 PM
It looks really nice.
Dr. Brian
06-23-2008, 07:03 AM
This set up is pretty close to what I have been planning. What is the D60 axle width and wheel backspacing? A couple of threads talk about needing wider flairs, but this appears to cover as built.
I get the same answer if anyone knows if 63.5 inch Pro Rocks will get covered with 37x1250s with 3.5 to 4.5 inches of backspacing.
forsakenfuture
07-30-2008, 02:26 PM
This whole time i thought the mud and stuff on the hood was a sticker of the AEV buffalo.
Where did you get that front bumper?It looks like a mini ARB.I love the bull bar but i dont think it would look good with the highline but yours is perfect.
JeepinJon
07-30-2008, 02:54 PM
This whole time i thought the mud and stuff on the hood was a sticker of the AEV buffalo.
Where did you get that front bumper?It looks like a mini ARB.I love the bull bar but i dont think it would look good with the highline but yours is perfect.
It is a Poison Spider Brawler Bumper w/ Warn 9.5ti Winch
MountZionOffroad
12-07-2009, 04:13 PM
This Jeep is currently for sale $29,900.00
Contact Mike @ Mount Zion Offroad (717)308-1844
vBulletin® v3.7.2, Copyright ©2000-2012, Jelsoft Enterprises Ltd.