Does this light work with the Saverge wheels? Is there anything more needed to make it work that the kit does not include?
AEV CHMSL 3rd Brake Light
Collapse
X
-
-
Curtis - 2008 JK Unlimited Rubicon Silver with 3.5 AEV lift, AEV Tire Carrier, Savegre Wheels and 35" MTRs w/ Kevlar - Former 2004 Dodge Ram 3500 4x4 Laramie 4 door - Former 2002 TJ with 33s.Comment
-
Comment
-
And with black Savegres. Sorry for the pic. I Would get you a better one, but Jeep is at dealer for an oil leak right now.
Zoomed in from this pic:
Last edited by TJ Willy; 03-16-2010, 12:44 AM.Comment
-
Thanks Jason.Comment
-
You have to splice into the existing wiring. Another option would be to do a Deutsch connector, which would probably be the best way to go, and the way I will redo this when I get a new rear bumper.Jon
2008 Rubicon Unlimited
4.5" AEV lift, 37" Nitto Trail Grapplers, AEV front/rear bumpers, AEV Corners, Factory Ten Axle Shafts.Comment
-
I simply spliced the wires together, soldered them (butane iron) and then used heat shrink. A connector is a good idea if you think you will be removing it often.Comment
Comment